• Phillips and flat head selection

2 Allen wrenches are needed:

• English size 1/16
• English size 1/20 (0.050)

Update: The Allen wrenches don't seem to work consistently well on removing the tri-wing screws. I recommend filing down an Allen wrench to form a tri-wing tool. You may also be able to use a flat head mini-screw driver inserted against one side of the tri-wing head. 

• Tape
• Large Flat Head Screw Driver
• Pliers

The 6 represent the hole size and the 32 represent the threads per inch.

Thanks to Paul from the Yahoo I-Cybie group for pointing this out.

Note: Late models of I-Cybie ( rev. K ) do not have the tampering stops.