|
|
Remove the one Phillips head screw near the upper back end on the left side. I'm pointing to it in the picture. |
|
|
Use the flat head screw driver to pop out the expansion cartridge on the right side. |
|
|
Here's the tricky part. You need to remove the 6 screws on the right side. In some versions of I-Cybie (usually early versions), 3 of the screws have a hollow plastic stopper above the head to prevent people from removing the screws easily. Since these stoppers are hollow, we can use a 3 inch long 6-32 screw to remove the stopper. You need to find which holes have the stopper and then use the screw to thread into the stopper. Once the stopper is attached to the end of the screw, just pull it out. |
|
|
Picture showing the black plastic tampering stopper on the end of the 6-32 three inch screw after it has been removed from the body shell. |
