|
|
Start by removing the three tri-wing screws on the side of the knee area. Use the smaller of the two Allen wrenches. If the screw head is stripped, you can sometimes use a mini flat head screw driver fitted to one side of the tri-wing screw. Turning the screw will feel wobbly but it's usually an adequate workaround for stripped heads. |
|
|
Remove the two tri-wing screws on the inner side of the upper leg portion (the thigh area). Use the larger of the two Allen wrenches. Or again, you can use a flat head screw driver if the screw head is stripped. |
|
|
Pull off the "thigh" shell. I found it was helpful to keep the shell and the 5 screws in a Zip Lock bag for tracking. |
